Aino Electronics Co., Ltd. is headquartered in Shenzhen. The brand was established in 2004. It mainly operates digital players, tablet computers and other electronic products. Today the editor will introduce to you the flashing tutorial of Aino novo7 Knight. This The notebook was launched in early 2010 and was discontinued in April 2012. The price quoted on the market so far is 499 yuan. Tablet computers require regular system upgrades to maintain the system from freezing and crashes. Let us take a look at the flashing tutorial of Aino novo7 Knight.
Aino novo7 Knight flashing tutorial introduction:
Preparation work:
1. Download the upgrade tool Livesuit .exe
The latest version is 1.07, download address:
This upgrade tool can run normally on WindowsXP, Vista and Win7 systems
2. Download the Required Novo7 firmware (.img file)
The current A10 firmware size is about 300MB in .img format. After compression and packaging, it is about 110M
3. Ensure that the machine has sufficient power
p>Please ensure that the machine has sufficient power, and do not perform firmware upgrades when the power is extremely low.
4. Make a good data backup and upgrade, and be sure to back up important data in the machine to the PC before flashing the machine
Upgrade steps
1. Install the upgrade tool Livesuite.exe on the PC.
Double-click the file
to generate the files necessary for the upgrade. This step will automatically install the driver. This is the dialog box that pops up under the XP system. Please click “Continue anyway" to complete the automatic installation of the driver.
2. Open Livesuit
Find the upgrade tool file and double-click it to open it.
3. Select the firmware
p>Click "No" in the picture above to close the user wizard upgrade, and click the "Select Firmware" button to select the file with the suffix .img:
4. Turn off the power
Make sure the Novo7 is turned off (when it is on, press and hold the power button for more than 8 seconds to force the power to shut down)
5. Press the key combination to start the upgrade
Press and hold the A10 tablet Without releasing any key (except the power key, volume + is recommended), connect it to the computer through the USB data cable, and then click the power key 5-6 times in quick succession. Remember not to release the key you started holding at this time. , until the interface as shown below appears on the computer, release all keys to start the upgrade.
(Note: If the driver installation dialog box pops up at this time, please point the path to the UsbDriver folder in the Livesuit installation directory. , and follow the next prompt to complete the driver installation)
6. Select forced format upgrade
Livesuit prompts "Do you want to force format?", click "Yes", the original All installed APKs will be deleted, otherwise the original APK will not be deleted.
It is recommended to force format and perform a complete update!!! Otherwise, the update may not be complete and it will become bricked!!!
< center>7. Upgrade begins
The "Confirm to force format" dialog box pops up, select "Yes", and the upgrade begins:
8. Upgrade completed
The firmware download process will take approximately 3 and a half minutes, please wait patiently until the message "Upgrade successful" is displayed.
9. Automatic restart
After the upgrade is completed, the tablet will automatically restart. You can unplug the USB cable at this time.
Please wait patiently if the machine starts up slowly for the first time.The machine does not restart automatically. Please press and hold the power switch for more than 8-10 seconds to ensure that the power is turned off, and then press the power button for more than 3 seconds to resume the boot action.
If you encounter problems and cannot upgrade, we provide the superddr version of the solution. :
Through my own practice, let’s accumulate two hard upgrade methods. Similar cases where the livesuit program fails to be installed can still be upgraded normally.
The process is to first open livesuit and select the firmware.
/p>
After choosing one of the methods, wait for the good news of Livesuit upgrading.
Okay, the above is the editor’s introduction to the Aino novo7 Knight flashing tutorial. Is it very simple? The editor reminds everyone at the end that Be sure to back up the data in the tablet before flashing, otherwise there will be nothing after the flashing is completed. Yes, there is a brand new system in the tablet. After backing up before flashing, you can restore the data to Aino novo7 Knight again after flashing. There are certain risks in flashing. Be sure to read the tutorial carefully during the process to reduce the risk. If When you encounter something you don’t understand when flashing your phone, it’s best to ask a friend who knows more about electronics for help.